Category: Safety


SCHUBERTH SAFETY HELMET Congratulations! You have made an excellent choice with this safety helmet. The safety helmet conforma to the requirements of DIN EN 397 and is a SCHUBERTH quality product that has beon specifically developed for the particular application. Safety helmet ore personal protective equipment and help to prevent head injuries or at least to

Climax mask and climax filter | mask | Filter

CLIMAX MASK, MOD 761 AND CU-MAX FILTER, MOD 760 The Climax mask mod.761 and Climax filter mod. 761 set has been designed taking into account the essential requirements applicable to it of Royal Decree 1407/1992 and its later modifications based on applying the relevant sections of regulations UNE-EN 140 UNE- EN 141 and UNE-EN 143.

Maintenance Safety

there is no voltage potential in the molten bath. If molten metal were to touchthe coil, the ground leak detectorprobe will conduct current from the coil to ground. This will be detected by the ground detector module and the powerwill be shut offto stop any coil arching. This also prevents high voltage from being carried

Foreword and safety precautions

NOTICE This manual contains proprietary information that is protected by copyright. All rights are reserved and no part of this document may be photocopied or reproduced in any way without the prior consent of Inductotherm (India) Limited. Information contained in this document is subject to change without notice. Inductotherm (India) Limited makes no warranty of

Safety Precaution By Webootech

1 GENERAL Inductotherm Power-Track/Power-Melt are efficient units, designed with interlocks and circuit protection modules. Operators, however, should be aware of all potential hazards involving high voltage and general foundry operations. The following safety precaution should be read and understood by all operational and maintenance personnel and management personnel responsible for safety. 2 SAFETY PRECAUTIONS The