Category: Technology

Automatic control system for water pump

INSTRUCTIONS FOR CORRECT UNIT INSTALLATION Pump controller A》 If the column of water between the pump and the highest tap exceeds 15mts, the unit cannot be installed directly on the pump controller, but it has to be raised until the column of water between the unit and the highest tap does not exceed 15mts. I.E:If

voltage and current measurement

VOLTAGE AND CURRENT MEASUREMENT 1》 Liquid Crystal Display 》 Digital Display The digital display shows the measurement value, decimal point and sign. When measuring DC quantities minus sign appears in front of the digits, if the positive pole of the measurement magnitude is applied to the “~” input. “OL appears if the measuring range upper

Multimeter || Digital Multimeter

Multi-meter & Digital Multi-meter Safety Features and Precautions You have selected an instrument which provides you with a high level of safety. The digital multimeter is manufactured in compliance with safety regulations IEC 61010-1:2001/EN 61010-1:200 To maintain the safe and proper condition of the meters and to ensure their safe operation, it is absolutely necessary

Hydraulic System

Hydraulic Power Pack The Power pack consists of an oil reservoir, a pump driven by an electric motor, filters pressure gauges and valves to control the flow or pressure of oil. It is designed to be used in a harsh foundry environment and should provide years of service if properly maintained. That’s why we wish


GENERAL PRECAUTIONS Hydraulic Cylinders which have been in storage for some time should be lubricated and cycled several times before they are installed on machines and subjected to actual working loads. Excessive break-loose and cycling pressures indicate the cylinder may have been damaged during shipment or storage. Costly installation and removal time can be eliminated

Induction Furnace heating

INTRODUCTION 1.1 GENERAL This manual is divided into vanious sections that will provide informaion on safety operation mainlenance and funclional descriptions of the systems. Itl is essential that the drawings and data packages included with each system be examined and understood prior to installation or operation of the unit Where a differenco exists between data